6 mm
Signature diameter
Calibrated silicone tube, identical along the full length of the neon, with no extra bulk at the curves.
Signature technology · Helioneon
Flexible LED neon silicone monoline: the Helioneon signature
Perfectly smooth 6 mm silicone tube, continuous glow with no visible LEDs, low voltage 12-24V. Premium technology built to last 100,000 hours.
3D mock-up within 24 hDelivered in 7 to 10 days3-year warranty
★★★★★5/5 · 500+ neons delivered
6 mm monoline silicone tube- 100,000 hLifespan
- 7-10 daysFree delivery
- 3 yearsWarranty included
- 12-24VSafe low voltage
The technology
What exactly is a flexible LED neon
A flexible LED neon is a soft tube sheathed in silicone or PVC, housing a high-density LED strip powered at low voltage. It recreates the look of traditional glass neon, without noble gas, without a high-voltage transformer, and without the fragility.
In practical terms, you get a continuous line of light, hand-bendable down to a 2 in (5 cm) radius, that can be cut to length and mounted straight onto a clear acrylic backing. Power draw falls to between 6 and 8 watts per meter, around ten times less than glass neon, and it runs from a simple 12 or 24 volt driver. This shift in approach has moved flexible LED neon from the industrial market into premium interior décor and high-end commercial signage.
Not all flexible LED neons are equal. The difference comes down to three measurable criteria: the sheath material (silicone vs PVC), the tube diameter (4, 6, 8, 10 mm) and the quality of the internal LED strip. That is precisely where the Helioneon signature is built.
They chose Helioneon
Our signature
The 6 mm silicone monoline technology
At Helioneon, we manufacture exclusively in 6 mm monoline silicone tube. That diameter is no accident: it is the perfect balance between line fineness, light intensity and mechanical strength. The silicone itself delivers a perfectly smooth surface, with no visible joins, and even beam diffusion. You will never see a single pinpoint LED. Just a continuous line of light, as if drawn with a brush.
100%
Continuous glow
High LED density (120 LEDs/m) paired with silicone diffusion that erases every visible LED.
12-24V
Low voltage
No high-voltage transformer, no electrical risk on contact, plugs into a standard outlet.
3 mm
Flush backing
Laser-cut clear acrylic backing set flush with the tube, never any visible overhang.
The real reasons
Why choose flexible LED neon over glass neon
Glass neon still holds historic charm, but in 2026 the rational choice consistently favours flexible LED. Here are six concrete reasons.
A lifespan multiplied by ten
100,000 hours on Helioneon silicone versus 8,000 to 15,000 hours for glass neon. Over ten years of daily use, you replace a glass neon, never a flexible LED. More details on the 100,000-hour lifespan.
An electricity bill cut by ten
6 watts per meter versus 60 to 100 watts. A 5-meter sign lit 12 hours a day drops from 1,800 kWh a year to 130 kWh, saving more than $290 every year.
No electrical risk on contact
Glass runs at 5,000-15,000 volts, which requires a dangerous high-voltage transformer. Flexible LED stays at 12-24V, with no risk at all, approved for installation in a child's bedroom or bathroom.
Truly free design
Glass is hand-blown, which drastically limits possible shapes and sends the price soaring on complex pieces. Flexible LED bends by hand, allowing cursive lettering, illustrations and detailed logos.
Safe transport
Glass breaks, that is its nature. Silicone is unbreakable, so you receive your neon safely with no worries, and you can move it without any special procedure.
Genuine customization made accessible
On a custom neon in flexible LED, the cost of an extra letter stays linear. With glass, every complex curve adds hours of blowing and sends the quote soaring exponentially.
Applications
Real-world uses for flexible LED neon
The versatility of silicone flexible LED opens up four major use categories, all covered by our catalog and bespoke service.
Interior decoration
Living room, bedroom, office, playroom. First names, quotes, motifs. Standard plug connection, dimmable remote.
Professional signage
Storefront, bar, restaurant, hair salon, studio. Signage readable day and night, illuminated brand logo.
Events
Wedding, birthday, seminar, trade show. Reusable photobooth neon, couple's names, event hashtag.
Customer projects
More than 500 projects delivered, from decorative first names to corporate signs. View the projects.
For professional projects with specific constraints (high-level signs, wide shop fronts, furniture integration), our team offers a dedicated service for businesses with technical study and approved artwork, delivered ready to mount with its fixing kit.
Technical commitments
The guarantees we stand by on every piece
A Helioneon flexible LED neon is not a disposable item. We put our name and our 3-year warranty behind every tube that leaves the workshop.
3 years
Manufacturer warranty
Covers LED, driver, junctions and silicone. United States after-sales support within 48 h.
100k h
Lifespan
That is 11 years of continuous 24/7 use, or 30 years at 8 h a day.
IP65
Waterproofing available
Option for outdoor use: rain, frost, bad weather. Certified Helioneon standard.
UL
Certification
UL or ETL listed power supplies and RoHS drivers.
Technical questions
Flexible LED neon FAQ
What is the difference between flexible silicone LED neon and PVC?
Silicone offers more even light diffusion, better resistance to UV and yellowing, and a premium matt finish. PVC, which is cheaper to produce, hardens over time, yellows under UV and often shows the LEDs through the sheath. For use beyond three years, silicone remains far more cost-effective and keeps its original look.
Can flexible LED neon be installed outdoors?
Yes, provided you choose our waterproof IP65 version, the Helioneon standard certified for all outdoor use (façade, terrace, garden, outdoor events). IP65 withstands water jets, driving rain, frost, UV and coastal weather. The driver comes in a waterproof housing, compliant with electrical standards for safe outdoor installation.
How do you cut flexible silicone LED neon?
Each tube has cut marks every 5 or 4 in (10 cm) depending on the model. You cut with a craft knife or shears at the mark, then seal the end with the silicone cap provided. For specific lengths, it is better to order the exact length directly on the product page, which guarantees a clean, waterproof finish at the ends.
What power supply do I need for my flexible LED neon?
Allow around 7 watts per meter on average, multiplied by the total length, plus a 20 per cent safety margin. A 5-meter neon therefore needs a driver of at least 42 watts, so a standard 60W model. All our neons come with their calibrated power supply, safety-certified (UL or ETL listed), so you do not need to do any calculations yourself, and nothing has to be sized, sourced or ordered separately on your side.
Does flexible LED neon heat up during use?
Very little. LED technology gives off less than 5 per cent of the heat of traditional glass neon. A silicone tube stays warm to the touch, never hot, making it completely safe for children's bedrooms, ventilated bathrooms and near textiles or wood. No fire risk, thanks to 12-24V low-voltage operation.
How much does a custom flexible LED neon cost in the United States?
The price depends on the total developed length of the tube, the complexity of the shape and the mount. For a standard first name 20 in (50 cm) high, expect from $265. For a professional sign 1.5 meters with a custom mount, the price rises to between $410 and $700. Variants based on the LED technology remain far more affordable than blown glass.
Technical questions
Flexible LED neon FAQ
What is the difference between flexible silicone LED neon and PVC?
Silicone offers more even light diffusion, better resistance to UV and yellowing, and a premium matt finish. PVC, which is cheaper to produce, hardens over time, yellows under UV and often shows the LEDs through the sheath. For use beyond three years, silicone remains far more cost-effective and keeps its original look.
Can flexible LED neon be installed outdoors?
Yes, provided you choose our waterproof IP65 version, the Helioneon standard certified for all outdoor use (façade, terrace, garden, outdoor events). IP65 withstands water jets, driving rain, frost, UV and coastal weather. The driver comes in a waterproof housing, compliant with electrical standards for safe outdoor installation.
How do you cut flexible silicone LED neon?
Each tube has cut marks every 5 or 4 in (10 cm) depending on the model. You cut with a craft knife or shears at the mark, then seal the end with the silicone cap provided. For specific lengths, it is better to order the exact length directly on the product page, which guarantees a clean, waterproof finish at the ends.
What power supply do I need for my flexible LED neon?
Allow around 7 watts per meter on average, multiplied by the total length, plus a 20 per cent safety margin. A 5-meter neon therefore needs a driver of at least 42 watts, so a standard 60W model. All our neons come with their calibrated power supply, safety-certified (UL or ETL listed), so you do not need to do any calculations yourself, and nothing has to be sized, sourced or ordered separately on your side.
Does flexible LED neon heat up during use?
Very little. LED technology gives off less than 5 per cent of the heat of traditional glass neon. A silicone tube stays warm to the touch, never hot, making it completely safe for children's bedrooms, ventilated bathrooms and near textiles or wood. No fire risk, thanks to 12-24V low-voltage operation.
How much does a custom flexible LED neon cost in the United States?
The price depends on the total developed length of the tube, the complexity of the shape and the mount. For a standard first name 20 in (50 cm) high, expect from $265. For a professional sign 1.5 meters with a custom mount, the price rises to between $410 and $700. Variants based on the LED technology remain far more affordable than blown glass.
Ready to create your neon
Ready to switch to monoline silicone?
Configure your flexible LED neon directly in the shop, or request a personalized quote for a custom project. Reply within 24 hours, in-house manufacturing, delivery in 7 to 10 days.
Free 3D mock-upReply within 24 hNo obligation